Trailor

In between coats of paint I molded bunks for the trailer at frames 89 and 169.  To do this i laminated 4" wide strips of 1/4 hydrotek plywood on the bottom of the boat at those frame locations.


I bought trailer a while ago for the project.  I took off the powerboat bunks so that I could fit the ones that I built on the boat.  The rear bunk bolts nicely onto the back frame on the trailer.  However, the front bunk needed brackets to hold it in place.  So anyway, I dusted off my welding skills and and created my own brackets.  For the metal I took the supports for the old powerboat bunk and cut them in half and then welded them in place.  I'll write more on this whole procedure when I have time in the future.