Thursday, June 28, 2012

Base coat is done on deck

 I'm done with the base coat on the deck of the boat.  I put on three coats of Interlux Perfection Snow White.  


The pictures to the left show the boat after I removed the masking tape which was protecting the cabin top and the curved corners in the cockpit.  As I'm mentioned several times earlier these were built using cedar strips, and my intention is to leave them natural.
The next step is to mask off the areas on the deck where I will not have a grip surface and then paint those areas.  Hopefully the non-skid will be done in a couple of days.  


The final step (as far as painting is concerned) will be to finish the cedar strip portions with Perfection clear.  

1 comment: